TrenGuard™ Trendelenburg Patient Positioning System

TrenGuard™ Trendelenburg Patient Positioning System

No review yet. Write Review
Regular price $0.00

vendor : OneUp Rehab Solutions

Product Type :

Sorry! Our TrenGuard™ Trendelenburg Patient Positioning System is currently sold out.

Want to be notified when it becomes available again? Simply register your interest and we'll send you a message when it does.

-
+
in stock On Request

D. A. Surgical
 

TrenGuard™ Trendelenburg Patient Positioning System

The TrenGuard™ Trendelenburg Patient Positioning System developed by D.A. Surgical remains the most clinically effective and time efficient Trendelenburg positioning system on the market. After a number of procedures performed using the System, there has not been a single report of a patient sliding, post-op discomfort or patient injury.

TrenGuard™ is the only system on the market with a rigid support frame that is fixed to the accessory table rails with table clamps. The frame cannot move and neither can the patient. TrenGuard™ Trendelenburg Patient Positioning System does not use shoulder braces.

The surface of the frame is covered with industrial strength hook fastener. Attached to the frame are four adjustable patient support pads that anchor the patient to the table.

 

Performance Specifications

(A) The TrenGuard “Speed Bump” bolster is rated to safely support patients up to 550 lb | 250 kg in steep Trendelenburg up to 40°.
(B) The unique shape of the head stabilising pillow protects against alopecia and maintains head position during the procedure regardless of the degree of Trendelenburg.

(C) The soft, lateral stabilising pillows are non-structural. They assure and maintain proper body alignment along the axis of the spine. They do NOT act as shoulder braces.

Improved Procedural efficiency


TrenGuard is so easy and intuitive to use that the staff becomes expert with the process after only one or two procedures.

Set up < 30 seconds
Positioning < 2.5 minutes
Turnover < 90 seconds


 

Positioning for Robotic Surgery

One of the most important discussions surrounding patient positioning today revolves around the area of robotic assisted laparoscopy. ​

The unique technology used by the surgical robot creates unintended consequences in regard to patient positioning.

  • ​It has become obvious that any sliding at all during robotic surgery creates added patient risk of injury and unnecessary postoperative pain. This risk occurs because the robots are not programmed to change the location of the robotic arm, instruments and trocars to compensate for patient sliding.
  • Fixed trocars ultimately result in what has been called “meat hook” restraint technology. When patients slide even “just a little bit” while in trendelenburg position it is the trocars that end up restraining the patient on the table.

In his paper, “Robotics in Practice: New angles on safer positioning,” Dr. Ghomi directly addresses this issue stating:

— “Patient slippage during the use of fixed robotic trocars creates a serious potential for patient risk as it can cause incisional tear, post- operative hernia formation, and increased postoperative pain secondary to over-stretching of the anterior abdominal wall.” —

If the restraint technology does not anchor the patient in place the patient can slide. Restraints known to allow patients to slide should not be used for robotic procedures.


 
 

TrenGuard™ 450 / 600 HYBRID Procedure Packs

TSDA-CE-55201
TSDA-CE-56201
Components of the procedure pack attach to the TrenGuard Patient Support Frame. Semi-reusable hybrid procedure packs include two (2) single-use pieces, to be used with HYBRID Lateral Stabilising Pillows. Available in two sizes.
 

TrenGuard™ HYBRID Lateral Stabilising Pillows

TSDA-CE-55250
TSDA-CE-56250
HYBRID versions of TrenGuard Trendelenburg Patient Positioning System utilise reusable lateral stabilising pillows. In addition to having a lower procedural cost there is a substantial reduction in medical waste. Available in two sizes.

 

TrenGuard™ Support Frame & Rail Clamps

TSDA-CE-56100
TSDA-CE-56250
TSDA-CE-22302

 

 

TrenGuard™ Integrated Wedge

TSDA-CE-55201
TSDA-CE-56201
Components of the procedure pack attach to the TrenGuard Patient Support Frame. Semi-reusable hybrid procedure packs include two (2) single-use pieces, to be used with HYBRID Lateral Stabilising Pillows. Available in two sizes.

 

PRODUCT CODE PRODUCT NAME QTY MAX WEIGHT
TSDA-CE-55201
TG450 Hybrid Procedure Packs
Case of 12
200 kg SWL
TSDA-CE-56201
TG600 Hybrid Procedure Packs
Case of 12
250 kg SWL
TSDA-CE-55250
TG 450 Hybrid Lateral Stabilizing Pillows
Set of 2
200 kg SWL
TSDA-CE-56250
TG 600 Hybrid Lateral Stabilizing Pillows
Set of 2
250 kg SWL
TSDA-CE-56100
TrenGuard™ Support Frame
Box of 1
n/a
TSDA-CE-56250
Slotted Rail Clamps – Denyers
Pair
n/a
TSDA-CE-22302
Slotted Rail Clamps – Eschmann
Pair
n/a
TSDA-CE-55401-IN
TrenGuard 450 Hybrid Integrated Wedge
Case of 12
n/a
TSDA-CE-55401-IN-6pk
TrenGuard 450 Hybrid Integrated Wedge
Case of 6
n/a
TSDA-CE-54812
TrenGuard 600 Hybrid Integrated Wedge
Case of 12
n/a

Refund policy

Privacy policy

Terms Of Service

Customer Reviews

No reviews yet
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
top
Added To Cart :
Add To Cart Failed :
prouduct successfully added to wishlist !